Fittings for hoses JIC female thread - 37° cone - crimped-back nut

Note: Fittings of this series are suitable for sealing cones at 24 to 60 degrees. Also referred to as DK (III) or a DC connector. Fittings are compatible with standard DKL or DKM.
If you want to order a fitting for coiling hoses, replace the last digit from 1 ... to 2 ...
Example:
xxx11-xx-xx-PM - fitting for braiding hoses
xxx12-xx-xx-PM - fitting for coiling hoses

article	brand	thread size	DN	ID (inch)	A	C	S2
26711-04-04-PM	POWERMASTER	7/16"x 20	6	1/4	15	9	15
26711-05-04-PM	POWERMASTER	1/2x20	6	1/4	15.5	9.5	17
26711-05-05-PM	POWERMASTER	1/2"х20	8	5/16	15.5	9.5	17
26711-06-04-PM	POWERMASTER	9/16x18	6	1/4	15.5	10.5	19
26711-06-05-PM	POWERMASTER	9/16"x18	8	5/16	15.5	10.5	19
26711-06-06-PM	POWERMASTER	9/16"x18	10	3/8	15.5	10.5	19
26711-08-06-PM	POWERMASTER	3/4"x16	10	3/8	17.5	11	24
26711-08-08-PM	POWERMASTER	3/4"x16	12	1/2	18	11	24
26711-10-06-PM	POWERMASTER	7/8x14	10	3/8	18.5	13	27
26711-10-08-PM	POWERMASTER	7/8x14	12	1/2	18.5	13	27
26711-10-10-PM	POWERMASTER	7/8"х14	16	5/8	20	13	27
26711-10-12-PM	POWERMASTER	7/8x14	20	3/4	20	13	27
26711-12-08-PM	POWERMASTER	1 1/16x12	12	1/2	19	15	32
26711-12-10-PM	POWERMASTER	1 1/16x12	16	5/8	21.5	15	32
26711-12-12-PM	POWERMASTER	1.1/16"x12	20	3/4	21.5	15	32
26711-12-16-PM	POWERMASTER	1 1/16x12	25	1	23	15	32
26711-14-12-PM	POWERMASTER	1.3/16х12	20	3/4	21.5	15	36
26711-16-12-PM	POWERMASTER	1 5/16x12	20	3/4	18.5	16	41
26711-16-16-PM	POWERMASTER	1.5/16"х12	25	1	23	16	41
26711-20-16-PM	POWERMASTER	1 5/8x12	25	1	23	17	50
26711-24-20-PM	POWERMASTER	1 7/8x12	32	1 1/4	20.5	20	55